Paper2

Proceedings of the International Conference on Industrial Engineering and Operations Management

Toronto, Canada, October 23-25, 2019

Paper Title (18 font bold center)

 

John A. Smith (12 font bold center)

A. Leon Linton Department of Mechanical Engineering (12 font center)

Lawrence Technological University

Southfield, MI 48075, USA

jasmith@ltu.edu

 

Mary Jacobs

Mechanical and Industrial Engineering Department

Tripoli University

Tripoli Libya

Mjacobs@tripoli.edu

Paper Title

· 18 font with bold and center justification

· All titles should be in standard mixed case, where the first letter of each word is capitalized and followed by lower case letters, as noted below:

 

Lean Manufacturing, Operations Management and Six Sigma Applications

 

Authors and Affiliations

· Author name – 12 font with bold and center justification

· Affiliation – 12 font with center justification

· Authors with same affiliation should be together

· Authors with different affiliation should be listed separately with one space in between

· Email can be added for each author

· Single space between affiliation and abstract title

Abstract (12 font)

 

Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract Abstract (10 font)

 

· Abstract title  – 12 font with bold and center justification

· Abstract text – 10 font with full justification

· Not exceeding 200 words.

Keywords (12 font)

Keyword 1, Keyword 2, keyword 3, Keyword 4 and Keyword 5. (10 font)

 

· No more than five keywords (10 font)

 

Page Layout

 

1. 8 1/2″ X 11″ paper

1. All margins: 1.00″

1. Full justification

1. Times New Roman font

1. Maximum 12 pages

1. Single space for entire manuscript

1. Conference name as a header and copyright information as footer must be used. Copyright information implies that IEOM Society International has right to publication the paper

 

1. Headings (12 font)

 

· 12 font size with bold and left justification

· Header should have numbering

1.1 Sub-Headings (11 font)

 

· Title – 11 font with sub-numbering

· Text – 10 font with no indexing

· One space between paragraphs

 

Figures

 

· Texts of figure should be readable

· Original high quality pictures

· Center justification

· Title of Figure should be in center and it must be mentioned as “Figure x: …”

· Title of figure should be sentence case with center justification and 10 font

· Title should be after figure

· All figure numbers must be mentioned in the body of the paper.

· One space between texts and figure, figure and title of the figure and title of the figure and texts.

 

 

 

Figure 1. Name of the figure

 

Tables

· Texts of table should be readable

· Center justification

· Title of table should be in center and it must be mentioned as “Table x: …” It should be added before table.

· Title of table should be sentence case with center justification and 10 font size

· All table numbers must be mentioned in the body of the paper.

· One space between texts and table, table and title of the table and title of the table and texts.

 

 

Table 1. Name of the table

 

       
       
       

 

 

Equations

 

· Equation numbering is optional.

 

Acknowledgements

 

· Add acknowledgement if needed

 

References (12 font)

 

· References title – 12 font with bold and left justification

· References texts – 10 font

· No numbering should be used for reference title

· Last name and year should be used for any reference citation. Last name and year should be used for single author and double authors. For more than two authors, last name of the first author and “et al.” with year should be used. For examples: Reimer (2009), (Reimer 2009), Reimer and Ali (2009), (Reimer and Ali 2009), Reimer et al. (2009) and (Reimer et al. 2009). Number is not allowed in the reference citation.

· All references must be cited in the paper.

· Journal and conference names should in in italic.

· Title of the book should be in italic.

· All lines after the first line of references list should be indented one-fourth (1/4) inch from the left margin. This is called hanging indentation. .

· Last name and first initial should be should in the reference formatting like below examples.

 

Chang, T., Wysk, R., and Wang, H., Computer-Aided Manufacturing, 3rd Edition, Prentice Hall, New Jersey, 2006.

Cook, V., and Ali, A., End-of-line inspection for annoying noises in automobiles: trends and perspectives, Applied Acoustic, vol. 73, no. 3, pp. 265-275, 2012.

Jones, M., Optimal lean strategy, Available: http://www.iienet.org/Details.aspx?id=xxx, May 21, 2011.

Khadem, M., Ali, A., and Seifoddini, H., Efficacy of lean metrics in evaluating the performance of manufacturing system, International Journal of Industrial Engineering, vol. 15, no. 2, pp. 176-184, 2008.

Pandian, A., and Ali, A., Automotive robotic body shop simulation for performance improvement using plant feedback, International Journal of Industrial and Systems Engineering, vol. 7, no. 3, pp. 269-291, 2011.

Rahim, A., and Khan, M., Optimal determination of production run and initial settings of process parameters for a deteriorating process, International Journal of Advanced Manufacturing Technology, April 2007, vol. 32, no. 7-8, pp. 747-756, 2007.

Rahman, M. A., Sarker, B. R., and Escobar, L. A., Peak demand forecasting for a seasonal product using Bayesian approach, Journal of the Operational Research Society, vol. 62, pp. 1019-1028, 2011.

Reimer, D., and Ali, A., Engineering education and the entrepreneurial mindset at Lawrence Tech, Proceedings of the International Conference on Industrial Engineering and Operations Management, Istanbul, Turkey, July 3 – 6, 2012.

Shetty, D., Ali, A., and Cummings, R., A model to assess lean thinking manufacturing initiatives, International Journal of Lean Six Sigma, vol. 1, no. 4, pp. 310-334, 2010.

Srinivasan, G., Arcelus, F.J., and Pakkala, T.P.M., A retailer’s decision process when anticipating a vendor’s temporary discount offer, Computers and Industrial Engineering, vol. 57, pp. 253-260, 2009.

 

Biography / Biographies (for single author – biography and multiple authors- biographies) – 12 font bold

 

· Include bio of each author at the end of the paper

· Limited to 200 words

 

Ahad Ali is an Associate Professor, and Director of Master of Engineering in Manufacturing Systems and Master of Science in Industrial Engineering in the A. Leon Linton Department of Mechanical Engineering at the Lawrence Technological University, Michigan, USA. He earned B.S. in Mechanical Engineering from Khulna University of Engineering and Technology, Bangladesh, Masters in Systems and Engineering Management from Nanyang Technological University, Singapore and PhD in Industrial Engineering from University of Wisconsin-Milwaukee. He has published journal and conference papers. Dr Ali has completed research projects with Chrysler, Ford, New Center Stamping, Whelan Co., Progressive Metal Manufacturing Company, Whitlam Label Company, DTE Energy, Delphi Automotive System, GE Medical Systems, Harley-Davidson Motor Company, International Truck and Engine Corporation (ITEC), National/Panasonic Electronics, and Rockwell Automation. His research interests include manufacturing, simulation, optimization, reliability, scheduling, manufacturing, and lean. He is member of IEOM, INFORMS, SME and IEEE.

 

Donald M. Reimer is the managing member of The Small Business Strategy Group, L.L.C and serves as an adjunct professor at Lawrence Technological University. Mr. Reimer holds a Bachelor of Science degree in Industrial Management from Lawrence Technological University and a Master of Arts degree in Political Science from University of Detroit/Mercy. He has been recognized as a professional management consultant with over 45 years of experience in working with closely-held businesses. He has taught courses in entrepreneurship, management and corporate entrepreneurship and innovation for engineers. Mr. Reimer served as member of the Minority Economic Development Committee of New Detroit. He has served as a KEEN Fellow for The Kern Family Foundation. He is member of the Lawrence Tech Alumni Board of Directors and has elected a Fellow of the IEOM Society International. Mr. Reimer is a faculty advisor of the Student Chapter of the IEOM Society at Lawrence Tech.

East 1st Qtr 2nd Qtr 3rd Qtr 4th Qtr 20.399999999999999 27.4 90 20.399999999999999 West 1st Qtr 2nd Qtr 3rd Qtr 4th Qtr 30.6 38.6 34.6 31.6 North 1st Qtr 2nd Qtr 3rd Qtr 4th Qtr 45.9 46.9 45 43.9

 

 

 

 

© IEOM Society International

Basic features
  • Free title page and bibliography
  • Unlimited revisions
  • Plagiarism-free guarantee
  • Money-back guarantee
  • 24/7 support
On-demand options
  • Writer’s samples
  • Part-by-part delivery
  • Overnight delivery
  • Copies of used sources
  • Expert Proofreading
Paper format
  • 275 words per page
  • 12 pt Arial/Times New Roman
  • Double line spacing
  • Any citation style (APA, MLA, Chicago/Turabian, Harvard)